Product Guide

das Curb Markers are available in three (3) different Styles: Economark, Standard and Duracast. All stock Standard or Duracast Style markers are imprinted with an Adhesive Guide™. No-Slip™ Surface is available on all Duracast Style markers.

Economark Style Markers
Abrasion Resistant
The das Economark Curb Marker is made from a .030 clear polycarbonate (
lexan) with the image imprinted on the reverse side.  It is then double flood coated with white.
pavement markers, storm drain, utility marker

Standard Style Markers
UV Resistant
The das Standard Curb Marker is made from a .030 opaque white plastic.  This proprietary material contains U.V.  inhibitors and a layering of materials for flexibility and impact resistance.  The printing is on the surface of the material which is then covered with our SolarShield™ clear coat for added U.V.  resistance.

 

underground utilities markers, pavement marker

Duracast™ Style Markers
Abrasion & UV Resistant
This das Duracast Curb Marker is the same as the Standard with one additional feature.  A polyurethane “dome” is applied to the face of the marker.  This optically clear, self-healing, non-yellowing, Duracast surface protects against mechanical and chemical abrasion.  The Duracast surface effectively doubles U.V.  resistance as well.

 

APWA color coded location markers

Back Printing
Many Standard and Duracast Stock Titles are imprinted on the back with our Adhesive Guide™. This insures proper adhesive application on every marker. 

Additionally every das Curb Marker is imprinted with a part number and a lot number for quality control.

 

Back Printing on utility marker for identification

No-Slip™ Surface
das offers a No-Slip finish on many Stock and Custom Duracast Style markers.  An optically clear granular material is imbedded in the surface providing an abrasive finish.  The surface exceeds ADA minimum recommendations for both wet and dry surfaces in public areas.

*Independent lab test results are available upon request.


das Adhesives
das Adhesives are offered for use exclusively with das Curb Markers.

das Curb Marker Adhesive #RS-222-5  / #RS-222-11
It is a single part adhesive which requires no mixing or special surface preparation.  The das Curb Marker Adhesive provides a permanent bond to concrete, asphalt, metal, or just about any flat non-soil surface.  It can be used to apply das Curb Markers to vertical or horizontal surfaces.  Black in color.

Recommended application temperature range is 40-90 F.  It will skin over in an hour, be firm within 2 hours, and achieve a full cure within 18 hours.* 

das Curb Marker Adhesive is available in either a 5 oz. re-sealable squeeze tube (recommended for volunteers) or for larger jobs; an 11 oz. cartridge for use with any standard caulk gun.

It will remain resilient and withstand freeze-thaw conditions without loss of adhesion for years.  Excellent impact resistance, long term bonding, easy application, and low cost make it the choice for most applications.  Proven performance since 1983.

*Cure times may vary due to weather conditions.
**das can offer a variety of specialty adhesives for unusual applications. Contact das for recommendations.

Optional Screw on Control Tip is available for 5 oz. Squeeze Tube.

das Economy Urethane Adhesive #DAS-229-11
An economical alternative adhesive to #RS-222.  Only available in 11 oz. Cartridge.  Gray in color.  Excellent long term adhesion.

das Rapid Set Urethane Adhesive #DAS-224-11
For special situations where a rapid cure is desirable.  Only available in 11 oz. Cartridge.  Black in color.  Sets up hard in two hours.

das Super Elastomeric Adhesive #DAS-234-11
Solvent free.  “ No V.OC.” alternative adhesive.  Only available in 11 oz. Cartridge.  Tan in color.

das Quickstik Epoxy Putty #QS-888
The das Quickstik is a hand malleable 2 part epoxy putty in a 4 oz. stick.  It will cure in approximately 5 minutes.  Gray in color.  Recommended for use in special situations requiring quick set-up or extreme surface temperatures.

das Adhesive Pads #AP-2.5  / #AP-4.0
A butyl adhesive with a paper liner on both sides offers a fast and simple application.  Solvent free.  Black in color.  Stock 2 ½” and 4” Circles.  Custom shapes and sizes are also available. 

Peel & Stick Option

PeelStick

Contact Us
Stick It & Mark It Permanently!
Since 1983 the das Curb Marker has been used successfully by customers nationally and internationally.
das Curb Markers can be easily installed on most flat surfaces such as concrete, asphalt and metal.


Custom Markers

Custom das Curb Markers can be made in just about any size, shape or color with virtually any message or language. All Custom markers are available in Economark, Standard or Duracast Style. Options such as No-Slip finish, Reflective or Non-Reflective, Numbering, Bar-Coding, to name a few, are available.

The possibilities are endless!

Custom Markers


More Examples of Custom Markers

Custom das Curb Markers can be made in just about any size, shape or color with virtually any message or language. All Custom markers are available in Economark, Standard or Duracast Style. Options such as No-Slip finish, Reflective or Non-Reflective, Numbering, Bar-Coding, to name a few, are available.

The possibilities are endless!

 

Custom Markers